Specification

The use of aerator part 116711
reduces flow to a maximum of
1.5 gpm (5.7L/min.)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Spout flow is limited to 2.0 gpm max (7.6L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Water Drinking Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Vestige™
Two Handle Bar Faucet
Models: 5994 series
4-1/8"
(104mm)
9-7/8"
(251mm)
7-3/4"
(197mm)
5-5/8"
(142mm)
4"
(102mm)
2-7/8"
(73mm)
Escutcheon
2-1/2” x 6-5/16”
(63mm x160mm)
COLD
1/2" NPT
HOT
1/2" NPT
3/4"
(19mm)
For deck thicknesses
greater than 3/4"(19mm),
use extension kit 100818
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 12/11
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 2 HOLES, 4" (102mm) ON CENTER