Full Product Manual

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1660
Towel Shelf wall flange is constructed of
17 gauge stamped brass. Shelf tubing
and towel bar tubing is .035 (20 gauge)
¾” O.D. brass tubing. Crossbars are
.025 (23 gauge) 3/8” O.D. brass tubing.
Tubing and escutcheon have a polished
brass or triple plated polished chrome
finish with a lacquer coat for added
protection.
 5205-610 – 24” Decorative Towel
Shelf with Extra Bar
Polished Chrome Finish
Assemble the towel bar and shelf to the wall flanges using the
four screws and eight washers (provided). Then mount the wall
flange at desired location using four 1 ½” flathead nickel plated
steel screws (provided).
Note: Wood blocking is preferable behind all wall surfaces. If
wood blocking is not available, the following optional fasteners
are suggested: Tile/Masonry – Plastic or lead anchors;
Plaster/Drywall – Toggle bolts.
Stock Number:____________Decorative Towel Shelf w/ Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Shelf
5205
Hotel / Motel Technical Specification
ALL CHROME BATH HARDWARE
IS TRIPLE PLATED WITH COPPER,
NICKEL AND CHROMIUM FOR
LONG LASTING BEAUTY, AND
MEET ASTM-B86 STANDARDS.