Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Duralock™ quick connect installation
• Metal construction with various finishes identified by suffix
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
• Includes metal pop-up type waste assembly
OPERATION
• Acrylic knob style handles.
• Rotate either handle in a counterclockwise manner to open and
clockwise to close
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1234™ Duralast™ cartridge
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU
®
Two-Handle Widespread
Lavatory Faucet
With Metal Waste Assembly
Model: 4962 series
With 50/50 Waste Assembly
Bulk Pack (6 per carton)
Model: 64962 series
NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#175709. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
1-1/4" (32mm)
MAX DECK
THICKNESS
8" (203mm)
16"(406mm) CENTERS
Quick
Connect
Hose
Assembly
4-1/4"
(108mm)
5-1/2"
(140mm)
ESCUTCHEON DIA.
2-1/8"
(54mm)
8"
(203mm)
4"
(101mm)
2-3/4"
(70mm)
Rev. 1/16
There is more than 1 version of this model.
Page down to identify the version you have.