Dimensions Guide

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
FAUCET DESCRIPTION
• Metal construction with either chrome plated
or LifeShine® polished brass finish
• Inlet shanks will accept 3/8" ball nose connections
OPERATION
• Knob style handles
• Counterclockwise on/Clockwise off
FLOW
• Spout flow is limited to 2.0 gpm max (7.6L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Designed and manufactured to comply with the requirements
of: CSA B-125 and ASME A112.18.1M and all applicable
requirements ref er enced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU
®
Two Handle Bar Faucet
Models: 4910, 4910P
Rev. 12/11
2"
(51mm)
2"
(51mm)
3-1/2"
(89mm)
ESCUTCHEON
6-3/4" (171mm) x 2-3/8" (60mm)
HOT INLET
COLD INLET
3-1/8"
(79mm)
8-3/8"
(213mm)
11-3/8"
(283mm)
3/4" (19mm)
MAX. DECK
THICKNESS
NOTE: DESIGNED TO INSTALL
THRU 2 HOLES 1" (25mm) MIN. DIA.
AND 4" (102mm) ON CENTER
The use of aerator part 116711
reduces flow to a maximum of
1.5 gpm (5.7L/min.)
CRITICAL DIMENSIONS
(DO NOT SCALE)