Dimensions Guide

ManualsBrandsMoen ManualsPlumbing Product4900

The use of aerator part 116711

reduces flow to a maximum of

1.5 gpm (5.7L/min.)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

There is more than 1 version of this model.

Page down to identify the version you have.

CHATEAU

Two-Handle Bar Faucet

Model: 4910

(50mm)

3-11/64"

(81mm)

(50mm)

COLD

1/2" NPT INLET

HOT

1/2" NPT INLET

3/4"(19mm)

MAX. DECK

THICKNESS

ESCUTCHEON DIA.

6-7/16" x 2-1/2"

(164mm x 64mm)

7-1/8"

(181mm)

10-1/2"

(267mm)

4-9/16"

(116mm)

NOTE: Designed to be installed through

2 - 1” min. dia. holes 4” on center

FAUCET DESCRIPTION

• Metal construction with chrome plated finish

• Inlet shanks will accept 3/8" ball nose connections

OPERATION

• Knob style handles with hot and cold color indicators

• Rotate either hadle counterclockwise to open and clockwise to close

FLOW

• Spout flow is limited to 2.0 gpm max (7.6L/min) at 60 psi

CARTRIDGE

• 1224 cartridge design

• Nonmetallic and stainless steel material

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1

and all applicable requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Water Drinking Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the

original consumer purchaser

• 5 year warranty if used in commercial installations

Rev. 12/11

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. FAUCET DESCRIPTION • • Metal construction with chrome plated finish Inlet shanks will accept 3/8" ball nose connections OPERATION • • Knob style handles with hot and cold color indicators Rotate either hadle counterclockwise to open and clockwise to close FLOW • Spout flow is limited to 2.0 gpm max (7.
PAGE 2
S p e c i f i c a t i o n s FAUCET DESCRIPTION • • Metal construction with either chrome plated or LifeShine® polished brass finish Inlet shanks will accept 3/8" ball nose connections OPERATION • • Knob style handles Counterclockwise on/Clockwise off FLOW • Spout flow is limited to 2.0 gpm max (7.