Dimensions Guide

DESCRIPTION
• Metal construction with various nishes identied by sux
• Flexible supplies with 3/8" compression ttings
• Mounts in single hole or 3 hole installation
• Three (3) individual boxes per master carton
OPERATION
• Pivot action, lever style handle
• Temperature control by 90° arc of handle travel
• Pulldown spray wand with 68” braided hose
• Operates in stream or spray mode in the pullout or retracted position by
rotating spray face
• Will operate with less than 5 lbs. of torque
FLOW
• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi
CARTRIDGE
• Ceramic disc technology
• Non-metallic, non-ferrous, and brass materials
• Single body construction for easy replacement
STANDARDS
• Third party certied to IAPMO Green, CSA B-125.1, ASME A112.18.1, and all
applicable requirements referenced therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA
for lever handle
WARRANTY – RESIDENTIAL, COMMERCIAL
• Ten year limited warranty against defects in materials and manufacturing
workmanship
• Refer to the installation instructions enclosed with each CFG product or
call 1-888-450-4910 for complete warranty information
NOTE:
• This faucet is designed to be installed through 1 or 3 holes 1-1/2" (38mm)
minimum diameter
One Handle Pulldown Kitchen
Models:
46201 series
SPECIFICATION SHEET
14-5/8"
(371 mm)
8-1/4"
(210 mm)
7-5/8"
(194 mm)
7-7/8"
(200 mm)
2-7/8"
(73 mm)
2-7/8"
(73 mm)
2-5/16"
(59 mm)
10-5/16"
(262 mm)
ESCUTCHEON
2-1/2"
(64 mm)
MAXIMUM
DECK THICKNESS
14-1/4"
(362 mm)
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • [phone] • www.cfgonline.com
CFG-46201 8/14
CRITICAL DIMENSIONS
(DO NOT SCALE)