Specification

ManualsBrandsMOEN ManualsBathCommercial 1/2 in. Transfer Valve

MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

DESCRIPTION

• Three function transfer valve

• Inlets and outlets on same plane

• 1/2” CC connections

OPERATION

• Detents at each flow position

• Valve operates 3 distinct functions but can be

plumbed for 2 distinct functions

CARTRIDGE

• Ceramic disk cartridge

STANDARDS

• Third party certified to meet ASME A112.18/CSA B125.1

and all applicable requirements therein including NSF61/9

WARRANTY

• Warranted for 5 years against material or manufacturing defects

Three-Function Commercial

Transfer Valve Trim Kit

Model: 3360

FINISHED

WALL LINE

3-16" - 2"

2-3/4" (69mm)

Min.

3" (76mm)

Min. Wall

Cavity

2-3/4"

(69mm)

Platerguard

Opening

Rev. 4/12

NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.

COMMERCIAL