Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Chrome plated metal construction
• Pressure balancing cycle valve design with an adjustable temperature
limit stop
• 1/2" CC connections
• Includes showerhead, arm and flange
OPERATION
• Clear acrylic knob style Handle
• Handle operates counterclockwise through a 270° arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) Max.
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet CSA B125.1, ASSE 1016, ASME A112.18.1,
and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU® POSI-TEMP®
Single-Handle Shower Valve
Model: 2352
THIN WALL APPLICATION
THICK WALL APPLICATION
FLOOR LINE
FINISHED WALL LINE
L
C
6.5" (165mm)
ESC. DIAM.
4-1/2" (114mm)
PLASTER
GROUND
OPENING
Shower
45" (1143mm)/
48" (1219mm)
6'-6"
(1981mm)
NOMINAL
2-3/4" C.C.
(70mm)
2-1/2" MAX. (63mm)
FLOOR LINE
1-3/8"
(35mm)
L
C
1-1/2"
(38mm)
PLASTER GROUND
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
3-1/2" (89mm) MAX.
2-1/4 (57mm) MIN.
1 3/8" (35mm)
FACE OF STUD
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
1/2" MIN. CC (13mm)
5/8" MIN IPS (16mm)
Rev. 2/11
There is more than 1 version of this model.
Page down to identify the version you have.