Specification

1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS DO NOT SCALE

Rev. 05/2023

SPECIFICATIONS

DESCRIPTION

• Brass swivel ball assembly (for 220R7 and 220R7EP series)

• 1/2” NPT connection (for 220R7 series and 220R7EP series)

• 1/2” IPS connection (for 220R6EP series)

OPERATION

• Infiniti

™

dial allows users to precisely adjust to their

preferred balance of force and coverage

FLOW

• Flowrate for non-EP models are limited to 2.5 gpm (9.5 L/min) max

• Flowrate for EP suffix models are limited to 1.75 gpm (6.6 L/min) max

• EP suffix models are limited to 1.75 gpm (6.6 L/min) MAX at 80 psi

STANDARDS

• Third party certified to meet: ASME A112.18/CSA B125.1

and all applicable requirements referenced therein

• EP suffix models are third party certified to WaterSense®

• EP suffix models are compliant with California

water efficiency regulations

WARRANTY

• Lifetime limited warranty against leaks, drips and finish

defects to the original consumer purchaser

• 5 year limited warranty when used in a commercial installation

• 10 year limited warranty when used in a multifamily installation

• Visit www.moen.com/support for complete details and limitations

Verso

™

Rainshower with Infiniti

™

dial

MODELS: 220R6EP series,

220R7EP series, 220R7 series

7”

178mm

3-7/16”

87mm

PAGE 1
SPECIFICATIONS DESCRIPTION • Brass swivel ball assembly (for 220R7 and 220R7EP series) • 1/2” NPT connection (for 220R7 series and 220R7EP series) • 1/2” IPS connection (for 220R6EP series) OPERATION • Infiniti™ dial allows users to precisely adjust to their preferred balance of force and coverage FLOW • Flowrate for non-EP models are limited to 2.5 gpm (9.5 L/min) max • Flowrate for EP suffix models are limited to 1.75 gpm (6.6 L/min) max • EP suffix models are limited to 1.75 gpm (6.