Installation Guide

ManualsBrandsMoen ManualsKitchen Sinks21538

Please Contact Moen First

For Installation Help, Missing or

Replacement Parts

(USA)

1-800-BUY-MOEN (1-800-289-6636)

Mon - Fri 8:00 AM to 7:00 PM, Eastern

Sat. 9:00 AM to 3:00 PM Eastern

WWW.MOEN.COM

(Canada)

1-800-465-6130

Mon - Fri 7:30 AM to 8:00 PM, Eastern

WWW.MOEN.CA

Por favor, contáctese primero con

Moen

Para obtener ayuda de instalación, piezas

faltantes o de recambio

01-800-718-4345

Lunes a viernes de 8:00 a 20:00 hs.

(Costa Este)

Sáb. 8:00 a 18:30 hs. (Costa Este)

WWW.MOEN.COM.MX

Veuillez d’abord contacter Moen

En cas de problèmes avec l’installation, ou pour

obtenir toute pièce manquante ou de rechange

1-800-465-6130

Du lundi au vendredi :

de 7 h 30 à 20 h, HE

WWW.MOEN.CA

Installation Guide

Guía de Instalación

Guide d’installation

HELPFUL TOOLS

For safety and ease of faucet replacement, Moen

recommends the use of these helpful tools.

HERRAMIENTAS ÚTILES

Para que el cambio de la llave sea fácil y seguro,

Moen le recomienda usar estas útiles herramientas.

OUTILS UTILES

Par mesure de sécurité et pour faciliter l’installation,

Moen suggère l’utilisation des outils suivants.

INS10470 - 9/15

STAINLESS STEEL DROPIN SINK WITH

QUICKMOUNT™ MOUNTING HARDWARE

INCLUDES ALL MOEN DROPIN SINKS WITH U CHANNEL MOUNTING SYSTEM

FREGADERO EMBUTIDO DE ACERO

INOXIDABLE CON FERRETERÍA DE MONTAJE

QUICKMOUNT™

INCLUYE TODOS LOS FREGADEROS EMBUTIDOS MOEN CON SISTEMA DE MONTAJE

DE CANAL EN U

ÉVIER EN ACIER INOXYDABLE À MONTAGE EN

SURFACE AVEC QUINCAILLERIE DE MONTAGE

QUICKMOUNT

INCLUT TOUS LES ÉVIERS À MONTAGE EN SURFACE MOEN AVEC SYSTÈME DE

MONTAGE À CANAL EN U

Summary of content (18 pages)

PAGE 1
INS10470 - 9/15 Please Contact Moen First For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) Mon - Fri 8:00 AM to 7:00 PM, Eastern Sat. 9:00 AM to 3:00 PM Eastern WWW.MOEN.COM Installation Guide Guía de Instalación Guide d’installation (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 8:00 PM, Eastern WWW.MOEN.CA Por favor, contáctese primero con Moen Para obtener ayuda de instalación, piezas faltantes o de recambio 01-800-718-4345 Lunes a viernes de 8:00 a 20:00 hs.
PAGE 2
1 1/4" (6 mm) A B x10 x10 D x10 E 1/4" (6 mm) C Parts List A. Sink B. Mounting Tool C. Mounting Bolt D. Mounting Clip E. Mounting Nut Lista de piezas A. Fregadero B. Herramienta de montaje C. Perno de montaje D. Clip de montaje E. Tuerca de montaje Position sink upside down on counter and trace outline. Ubique el fregadero boca abajo sobre la cubierta y dibuje su contorno. Placer l’évier à l’envers sur le comptoir et tracer le contour. Draw cut line ¼" inside the sink outline.
PAGE 3
6 7 C 8 A 1 D 2 3 E 1/8"-1/4" x10 Insert clip onto screw and thread on nut maximum of 2 turns. Inserte el clip sobre el tornillo y enrosque sobre la tuerca un máximo de 2 vueltas. Insérer l’attache sur la vis et la visser sur l’écrou en effectuant un maximum de 2 tours. (3-6 mm) Insert mounting hardware onto sink mounting rails along each side as illustrated. 10 total mounting hardware included.
PAGE 4
INS10470 - 9/15 Instruction for non-disposal installation: 1 Note: Do not use sealant 2 Nota: No use sellador Instrucción para instalación sin triturador de desperdicios: Sink Fregadero Évier Directives pour une installation sans broyeur : Remarque : Ne pas utiliser d’agent d’étanchéité. 3 Sink Fregadero Évier 4 5 1. Clean thoroughly around drain opening in sink. 1. Limpie cuidadosamente alrededor de la abertura de desagüe en el fregadero. 1.
PAGE 5
ENGLISH Stainless Steel Sink Cleaning Recommendations: If maintained properly, your Moen® stainless steel kitchen sink will not chip, peel, rust or discolor. The following chart illustrates our recommendations for maintaining the original appearance of your new Moen® stainless steel kitchen sink. SITUATION CLEANING RECOMMENDATION Routine Cleaning: Soap, ammonia, detergent and water. Rub with a sponge or cloth followed by a thorough rinsing, then dry. Smears and fingerprints: Use window or glass cleaner.
PAGE 6
Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period" for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.
PAGE 7
INS10205A - 8/15 Installation Guide Guía de Instalación Guide d’installation Please Contact Moen First For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) Mon - Fri 8:00 AM to 7:00 PM, Eastern Sat. 9:00 AM to 3:00 PM Eastern WWW.MOEN.COM (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 7:00 PM, Eastern WWW.MOEN.CA Por favor, contáctese primero con Moen Para obtener ayuda de instalación, piezas faltantes o de recambio 01-800-718-4345 Lunes a viernes de 8:00 a 20:00 hs.
PAGE 8
Parts List Note: Style may vary by model Nota: El estilo puede variar por el modelo Note : Le modèle peut varier par le modèle H A I B J C A. B. C. D. E. F. G. H. Lista de piezas A. B. C. D. E. F. G. H. K arita cori Simet e io eser et audia d stiis as occus e aest, ut i t n i m t e L A. B. C. D. E. F. G. H.
PAGE 9
INS10205A - 8/15 1A 1B B or o ou B 2 O 1 1. Use Gasket (B) only. Place Gasket (B) on top of the sink. 2. Insert faucet. Place Deck Plate (N) and Deck Plate Gasket (O) on top of sink. Insert faucet. Coloque la placa de cubierta (N) y el empaque de la placa de cubierta (O) sobre el fregadero. Inserte la mezcladora. 1. Use el empaque (B) solamente. Coloque el empaque (B) sobre el fregadero. 2. Inserte la mezcladora.
PAGE 10
4 3 F 1 A 1 2 G 1. Thread the Hose Guide (G) on to the end of the shank as shown. 2. Tighten by hand. Use Installation Tool (A) and a screwdriver as shown to tighten the Mounting Nut (F). Use la herramienta de instalación (A) y un destornillador como se ilustra para apretar la tuerca de montaje (F). 1. Enrosque la guía de la manguera (G) en el extremo del tubo roscado como se ilustra. 2. Apriete a mano.
PAGE 11
INS10205A - 8/15 7 L M Place Hose Weight (M) on to Pulldown Hose (L). Coloque el peso de la manguera (M) en la manguera retráctil (L). Placer le poids du tuyau (M) sur le tuyau rétractable (L). ATTENTION / ATENCIÓN / MISE EN GARDE For the best performance of your new pullout faucet, Moen recommends the following: • Maintain 8"x 8" clear area for the hose and weight to travel, free of any moveable items including (bottles, cleaning supplies, etc.). See Illustration.
PAGE 12
8 9 C Attach product identification label here. 2 1 arita cori Simet e io eser et audia d stiis as occus e aest, ut i t n i et m Sujete la etiqueta de la identificación de producto aquí. Attachez l'étiquette d'identification de produit ici. 1. Attach flexible supply lines to shut off valves. 2. Tighten with a wrench. Attach the Product Identification Label (C) in a conspicuous location such as on an inlet supply line. Turn the water supply line valves on and check for leaks. 1.
PAGE 13
INS10205A - 8/15 11 12 Discard Discarte Jeter 1 J L L 2 J 3 Using pliers, make a 1/8 turn. Do not over tighten. 1. Discard protective cap from Spray Wand (J). 2. Ensure that the Screen and O-ring (I) are in the inlet of the Spray Wand (J). 3. Thread Spray Wand (J) on to Pulldown Hose (L) assembly. Dé 1/8 de vuelta con unas pinzas. No apriete de más. Utiliser les pinces et tourner de 1/8 de tour. Ne pas trop serrer. 1. Descarte la tapa protectora de la varilla rociadora (J). 2.
PAGE 14
Parts List P Q P. Q. R. S. T. U. Soap Dispenser/Pump Straw Soap Dispenser Base Gasket Mounting Nut Bottle R Lista de piezas R S T U P. Q. R. S. T. U. Dosificador/bomba de jabón Pajilla Base del dosificador de jabón Empaque Tuerca de montaje Botella S Liste des pièces P. Q. R. S. T. U. Distributeur de savon / Pompe Tube Base du distributeur de savon Joint d'étanchéité Écrou de montage Bouteille Put Soap Dispenser Base (R) thru the Gasket (S) and in to the sink hole.
PAGE 15
INS10205A - 8/15 17 P P 1 Q 2 R 1. Assemble Straw (Q) on to Soap Dispenser/Pump (P). 2. Insert Soap Dispenser/Pump (P) into the Soap Dispenser Base (R) as shown. Finished installation. Instalación terminada. 1. Arme la pajilla (Q) en el dosificador/bomba de jabón (P). 2. Inserte el dosificador/bomba de jabón (P) en la base del dosificador de jabón (R) como se muestra. Installation terminée. 1. Assembler le tube (Q) sur le distributeur de savon/la pompe (P). 2.
PAGE 16
C D L I 1 1 2 J J Clean Screen (I) as shown by rinsing it for a few seconds to remove any possible debris. Turn off water before reinstalling Screen and O-ring. 1. Re-install the O-ring and Screen (I) into the Spray Wand (J). 2. Reattach Spray Wand (J) to Pulldown Hose (L) and tighten. Limpie el filtro (I) como se muestra, enjuagándolo por unos segundos para remover cualquier basura. Cierre el agua antes de volver a instalar el filtro y el anillo de caucho. 1.
PAGE 17
INS10205A - 8/15 English Spot Resist™ Stainless and Spot Resist™ Brushed Nickel Finishes: Moen recommends cleaning the Spot Resist finish with a mild soap, rinsing thoroughly with warm water and drying with a clean, soft cloth. Never use cleaners containing abrasives (including abrasive sponges or steel wool), ammonia, bleach or sodium hypochlorite, organic solvents (e.g. alcohols) or other harsh chemicals (e.g. lime scale removers) to clean the Spot Resist finish, as they may damage the finish.
PAGE 18
Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period" for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.