Specification Sheet

Polished Brass Finish Recessed
Paper Holder shell is die cast from
highest quality zinc alloy (zamac) with a
triple plated polished brass finish.
Roller is plastic and spring loaded.
Stainless Steel Recessed Paper
Holder shell is stamped from corrosion
resistant type 304 stainless steel with a
polished finish. Roller is plastic and
spring loaded.
q
1576PB
–
Recessed Paper Holder
Polished Brass Finish
White Roller
q 1576SS – Recessed Paper Holder
Polished Stainless Steel Finish
White Roller
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: [phone] •
FAX: (440) 962
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
Cut out wall opening 5 ¼” x 5 ¼” x 1 7/8” depth. If wood blocking
is available, install recess shell into opening using 1 ¼” screws
(provided). If wood blocking is not available, use optional
installation clamp: BR587 or 588.
Stock Number:
_____________Recessed Paper Holder
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Recessed Paper Holders
1576
Recessed Fixtures Technical Specification

Copyright CSI Bath Furnishing Division of Moen 02/22/01