Installation Manual

5569/5570
QUEEN BED
F
A
A
F
4
4
5
9
9
1
2
3
3
Insert the connector on the
Cross Bar-2 (4)
then insert them into the
Post-2 (2) &
into the
by using Bolts (A) and Allen Wrench (F )
.
corresponding holes on
Post-3 (3)
Cross Bar-2 (9)
Place Side Rail (4) to the assembled Post-2 (2) and Post-3 (3) Bolts (A) and Allen Wrench (F )
as shown.
Repeat the same steps for the remaining Post-1 (1) & Post-3 (3) & Cross Bar-2 (4).
20
F
Place Side Rail (4) to the assembled Stretcher (6) by using Bolts (C)
& Nut (E)
and Allen Wrench (F ) &
as shown.
6
6
6
4
4
as shown and
F
F
E
E
C
C
8 F 8
by using
Place Center Rail (5) to the assembled Stretcher (6) by using Bolts (C) & Nut (E)
and Allen Wrench (F )
as shown.
E
H×1
H
H
C
Repeat the same steps for the remaining Post-1 (1) & Post-3 (3) & Cross Bar-2 (9).
10
10
Place Center Rail (5) to the assembled by using Bolts (A) and Allen Wrench (F ) as shown.Connect Bar (10)
Repeat above for the other Side Rail (4).
5
F
G
G×2
& Flat Washer (G)
Open Wrench (H)
Open Wrench (H)