Installation Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 2
EEI –2228/2229 CHAIR
STEP 1:
STEP 2:
Please put Chair Body (1) upside down on a carpeted or padded area.
Then open the zipper on the bottom of Chair Body (1), to make the inside of the Chair Body(1) fully visible.
Please find Legs (2&3) package and hardware package inside of the Seat Chair Body (1).
Insert 1 piece of Front Leg (2) into the left upper hole on bottom of the Chair Body (1) as shown.
Attach the Front Leg (2) by using 2 pieces of Bolt (A), 2 pieces of Spring Washer (B) and 2 pieces of Flat Washer (C).
Repeat the same steps for remaining Front Leg (2) and Back Leg (3).
Do not fully tighten Bolts (A) for either leg.
D
Ax8 Cx8 Bx8
Hardware & Tool required
1
B
C
A
Hardware & Tool required
3
2
Assembly is completed. The chair is ready to use now!
Dx1
Carefully turn over the dining chair.
Close the zipper on bottom of the Chair Body (1).
Please put a heavy object or seat one adult on top of the Chair Body (1) to pressure the chair for leveling.
Fully tighten all Bolts (A) with Allen Wrench (D).
Recover the zipper on the bottom of Chair Body (2).
1
2
3
Legs Package
+
Hardware Package