Installation Manual

Customer Service 908-368-1025www.modwayfurniture.com Page 2 of 3
EEI –2220/2221 CHAIR
STEP 1:
STEP 2:
Ax1 Cx1 Dx1
Hardware & Tool required
Bx4 Dx4
Cx4
Hardware & Tool required
1
B
Please put Chair Back (1) upside down on a carpeted or padded area.
Then open the velcro on the bottom of Seat Frame (2), The inside of the Seat Frame(2) will now be visible.
Attach Seat Frame (2) to Chair Back(1) by using 1 piece of Bolt (A), 1 piece of Spring Washer (B) and 1 piece of Flat
Washer (C) as shown.
Do not fully tighten Bolt (A) at this step.
Insert 4 pieces of Bolt (B), 4 pieces of Spring Washer (C) and 4 piece of Flat Washer (D) from the holes at the corners of
Seat Frame (2) into the holes at the Chair Back (1) as shown.
Do not fully tighten Bolts (B) at this step.
2
A
C
D
1
2
3
C
D