Specifications
2.3.2.1. Shipment Statuses
A shipment can have any of the following statuses:
• Compliant
All the parameters dened in the shipment prole were adhered to or the status has
been changed by the user.
• Non-Compliant
Certain parameters dened in the shipment prole were violated. The violated
parameters are indicated in the Shipment Deviations section. This status can be set
by the user only.
• In Transit
While a shipment is in transit, the temperature curve is not displayed, and no data is
shown in either the shipment deviations or the shipment statistics.
• Examination Required
Due to a temperature deviation while the shipment was being transported, you are
required to set the shipment status to Compliant or Non-Compliant.
• Missing Data
The expected shipment duration has exceeded but the logger data has not been
read. You can change the shipment status to Missing Data Acknowledged.
• Missing Data Acknowledged
Shipment data is unavailable. This status can only be set by the user. If the
shipment data arrives at a later point in time, the status will be updated
automatically.
• Erroneous
A problem with the logger has occurred, which requires the attention of customer
support. You can change the shipment status to Error Acknowledged.
• Error Acknowledged
Shipment data is unavailable. This status can only be set by the user.
Page 17 of 59