Installation & Assembly

22 | PageRev B | 10/9/18
Step 1 Apply double-sided tape to the tops of the base cabinets, toolboxes and countertop
braces. Make sure to apply the tape across the entire front edge of the cabinets.
DO NOT REMOVE THE TAPE BACKING
Step 2 Before you remove the backing from the tape, test fit your countertops to make
sure they fit correctly.
Step 3 Remove the backing from the tape and thoroughly spray it with window cleaner. This
allows you to adjust the countertop before it sets permanently.
Step 4 Place the countertop straight down onto the tape. Allow the tape to dry for 15 minutes.
COUNTERTOP