Installation & Assembly

2 | PageRev B | 10/9/18
TABLE OF CONTENTS
TOOLS YOU’LL NEED
 #2 Phillips Screwdriver -OR-
Cordless Drill/Driver with #2 Phillips Bit
 3/8” & 11/32” Wrenches
 Level
 Tape Measure
 Window/Glass Cleaner
! WARNING !
To insert self-tapping screws with an electric driver,
start with the clutch setting on low and increase it
incrementally until the screws turn.
Reset your clutch every time you
recharge your battery.
WHEN YOUR CABINETS ARRIVE
When your order is delivered, remove the packing material and thoroughly inspect all cabinets for
damage. If you see damage to the cabinets sign the bill of lading with Damage, or if you see damage
to the packaging sign the bill of lading with Possible Concealed Damage, then contact Moduline.
2 When Your Cabinets Arrive
2 Tools You'll Need
2 Before You Begin
3 Base Cabinet
8 Closet
13 Overhead Cabinet
14 Instant Walls
17 Installing Your Cabinets
18 Countertop Brace
19 Corner Filler
22 Countertop
For the best results, keep these tips in mind:
 Wherever possible, leave the protective vinyl on your cabinets until installation is complete.
Peel it back only where necessary for attaching parts together.
 Mark on the floor and wall where your cabinets will go. If you have a studded wall, mark the
studs now.
 When attaching cabinets together, don't tighten down the bolts until you start shimming.
 Find the highest spot on your floor with a level. When shimming your cabinets, start there and
shim up to that level as you move away.
BEFORE YOU BEGIN