Installation & Assembly

17 | PageRev B | 10/9/18

Step 1 Put the ﬁrst cabinet in place. Loosen the toe kick bolts to adjust the gap between the

toe kick and cabinet sides and insert shims as necessary for leveling. We recommend

that you level each cabinet as you go but only tightening the toe kick bolts after all the

cabinets have been installed. Attach the cabinet to the Instant Walls with 1/4-20 bolts,

or to your own walls with appropriate mounting hardware (not provided by Moduline).

Step 2 If the next component in line is a Countertop Brace, see page 17.

If the next component in line is a Corner Filler, see pages 18-20.

Otherwise, put the next cabinet in place and loosely bolt the cabinets together. To

add mounting holes to a closet, drill through the holes in the adjacent cabinet. Shim as

necessary, then tighten the bolts between the cabinets.

Step 3 Repeat steps 1 & 2 until all your cabinet components have been installed.

Step 4 See page 21 for instructions on installing the countertops.

INSTALLING YOUR CABINETS

Shim

