Installation & Assembly

15 | PageRev B | 10/9/18




x16
INSTANT WALL
Instant Wall panels come in two sizes: a 12" wide panel that will make
up the majority of your Instant wall, and a 14" wide panel that is only
used with Mobile Toolboxes.
Step 1 Pair off Instant Wall panels of the same size. Bolt them together
with a stiffener on both sides of the joint. Keep the tops of
the panels flush when tightening the bolts.
Step 2 Insert cage nuts in the back of each panel section. Refer
to the diagrams below for the number of nuts and where to
put them for each type of cabinet.
Step 3 Starting at a corner (if applicable), bolt the
panel sections together as before until the
Instant Wall is complete.
Assemble corner joints using two stiffeners,
a long angle , and two short angles .



Closet Mobile Toolbox & 28" Overhead CornerBase Cabinet & Overhead


x14
  

x10

x9

x10
 

x8