Use Instructions

Figure 38. Foot switch pedal is pressed down and
laser is active.
You must press the orange pedal on the foot
switch down to activate the laser. The laser is
active as long as the foot switch pedal is pressed
down and there is treatment time remaining.
The remaining time is counted down only
when the laser is active (Figure 38).
WARNING
After pushing the laser emission switch (orange pedal) on the foot switch in treatment
mode, the device emits laser light from the SLA. Releasing the emission switch during
treatment will pause the treatment.
Pausing a treatment
You may release the foot switch emission
pedal at any time during the treatment if
needed. If the emission pedal is released the
laser is set off immediately and the treatment
is paused (Figure 39). The pause length is
not limited by the ML6710i and you may
continue the treatment whenever ready.
The treatment is continued when the emission
pedal on the foot switch is pressed down again.
Figure 39. Treatment is paused.
Revision 9
41Operating the laser device