Use Instructions

Figure 37. Treatment screen when the treatment
can be started by pressing the foot switch.
Figure 36. Confirmation of the treatment
parameters.
Preparing the patient for the treatment
Please consult the prescribing information
for instructions regarding the drug
administration before giving the laser dose.
Please consult the instructions for use of the
contact lens for proper use and maintenance.
Please consult instructions for use of the slit
lamp for proper use and maintenance.
It is not mandatory to have laser safety eyewear
on the untreated eye of the patient. However,
wearing an eye-patch or similar protection
during laser administration is recommended.
4.3.2 Proceeding to treatment
After configuring the treatment parameters
(Figure 33), you may proceed to treatment
parameter confirmation by tapping
the start treatment button, which leads
to Figure 36 showing the treatment
parameter confirmation window before
the actual treatment can be started.
Check the treatment parameters. If some of the
parameters are wrong, you need to tap return to
planning and set correct treatment parameters.
If the parameters are correct, tapping confirm
leads to the treatment screen shown in Figure 37.
Treatment screen shows the treatment status
and guides you during the treatment. Please note
that in the treatment screen the GUI navigation
is disabled and transition between function
tabs is possible only after ending a treatment.
ML6710i Instructions For Use
40 Operating the laser device