Use Instructions

Figure 25. My settings tab.
Figure 26. My lenses view.
available ML6710i is proposed. You may do this as
many times as is needed to find the right device.
When the desired laser device is proposed, the
connection is done by tapping connect. The
ML6710i is ready for use when the connection
is established (status connected) and device
State is Ready for operation as in Figure 22.
4.2.6 Treatment tab
When you log in to the ML6710i application
the treatment tab is selected by default.
The treatment tab shows either the treatment
planning screen (Figure 33) or the treatment
screen (Figure 37) depending of the device
state (e.g., in case of an unfinished treatment).
4.2.7 My settings tab
My settings tab shown in Figure 25
contains several important features.
My lenses
My lenses option allows you to define the
contact lenses available for selection in the
Treatment planning screen (Figure 33).
Figure 26 shows how specific contact
lenses may be activated or inactivated
(only the activated lenses will be shown
in treatment planning screen).
Using My lenses is not mandatory but it helps
in treatment planning step since you can limit
lens options only to those in your typical use.
ML6710i Instructions For Use
34 Operating the laser device