Use Instructions

3.4.1 Connection and disconnection of SLA, interlock and foot switch
Figure 10. Hold the connector by the grid-surfaced barrel only.
Figure 9. Attach the SLA, interlock and foot switch
connectors red dot upwards.
Connection
While connecting the push-pull connectors
to rear panel, please keep the red dot on the
connector to upwards direction. Push gently
until the connector is all the way in its place.
Disconnection
Do not use excessive force while disconnecting the push-pull connectors
on the rear panel. Do not twist the push-pull connectors.
PROHIBITED
To disconnect the SLA, interlock or foot
switch from the ML6710i rear panel:
 Hold the connector by the grid-
surfaced barrel only (Figure 10)
 Gently pull the barrel away from the
ML6710i rear panel to disconnect
The SLA, foot switch and the interlock are connected to the rear panel of the ML6710i with push-pull
type connectors (Figure 9).
ML6710i Instructions For Use
24 Product delivery package and installation