Use Instructions

Figure 2. Intact and activated shock indicator. The red indicator on the right side indicates that the ML6710i
has been exposed to a potentially damaging impact during transit.
Transport case
 Inspect the transport case for cracks,
dents and big scratches. They typically
indicate a major impact on the transport
case possibly harmful for the device
 Inspect the shock indicator attached
on the transport case side
 In case any of the steps above give rise to
concerns of the device condition, please
follow instructions in the next section
ML6710i transport case is equipped with a shock indicator (Figure 2). When receiving the
unit, check that the shock indicator has not activated. Activation of the indicator means
that the device has been exposed to a potentially damaging impact during transit. A
service person authorized by the manufacturer needs to verify the device functionality.
WARNING
ML6710i
 Inspect that all items are in their respective
positions inside the transport case
 Inspect that the items supplied
and accessories listed in section
3.2 are visually intact
 Take the main unit from the transport
case and carefully turn it from vertical to
horizontal position to listen that there is no
movement or clinks inside the device
 In case any of the steps above give rise
to concerns of the device condition,
please contact the manufacturer
3.1.1 Post-shipment inspection protocol
Follow the instructions in this section to ensure the device has not damaged during transit.
Revision 9
17Product delivery package and installation