Manual
User Manual MODSTER M770
10 www.modster.at
8. Improper assembly may bring risks of loss of control, collision or fall-o. When assembling the scooter, use
appropriate force. Either screwing too tight or too light may cause damage to the e-scooter or malfunctions.
9. Never conduct assembly with the power on.
10. Do not try to modify, repair or reset the e-scooter by yourself or let any unauthorized party do the work.
11. Should any problem happen, feel free to contact us at any time. This is your most reliable choice.
12. Before riding, always make certain, that no abnormalities such as loose parts, damage or malfunctions exist
on e-scooter.
13. The wheels are pneumatic, an improper inflation or tire pressure may lead to travel instability or easy
damage, even trac accidents in extreme cases.
14. Make sure to measure the tire pressure at least once a month.
15. Remeasure it before you go on a long-distance ride.
16. Should you spot any loose part, damage, abnormality or malfunction during the use of your e-scooter, stop
using it immediately, and carry.
17. Prior to charging the e-scooter, make certain the charging port is dry and free from malfunctions and
objects. Only a correct receptacle (100V-240V/50HZ-60HZ) can be utilized for charging. When the e-scooter
is being charged, keep children and pets away. Make sure there are no infammable materials nearby.
18. Your e-scooter battery must be stored in environments with a temperature ranging from -20 to 45°C. Do
not place the e-scooter, where the temperature is over 45°C. When the ambient temperature falls below
-20°C, the battery will enter a self-locked state and can't be charged or used. If that happens, first bring the
e-scooter to a warmer place, to unlock the battery for charging and using.
19. In any case of leakage or other abnormalities (including breakage, emission of odd smell or smog, overheat,
etc.), stop using the product immediately and prevent the battery from contacting other objects.
20. Never try to open or dissemble the battery, or perform any irrational operations or use it in an irrational way.
21. Depending on the battery state and environmental conditions, fully charged e-scooter (the display screen
showing 5 bars of power) will have a standby time of approximately 30 days. Bear in mind, that irreversible
damage to the battery can be caused by failure to charge it in time. Do not store the Scooter with empty
battery after driving, charge battery before starting.
22. Do not wear high heels or other unsuitable shoes, too loose or other unfit clothes to ride the e-scooter and
always wear specialized protective gears, when riding the e-scooter.
23. When you are to ride your e-scooter, it's strongly recommended, that you wear a pair of safety goggles, lest
dirt, dust or insects harm your eyes or undermine your riding safety.
24. Never try to ride the e-scooter on rainy days or wet roads. It's not allowed and may reduce the tires
resistance and lengthen the scooter's braking distance and may also lead to loss of control or other
accidents by tire skidding.
25. Use soft cloth to wipe and clean the e-scooter. Never attempt to hose down the e-scooter with a strong jet
of water or a high-pressure hose, nor immerse it in water, as this may result in uncontrollable malfunctions,
abnormalities or accidents, and will also void the warranty.