Manual

F
Manual MODSTER FOLD 4K
20 www.modster.at
Install the Protector:
Charging the Drone Battery:
Pull the accesory (Pic 1) and press the locking plate on the protector, as the same time push-in the protector (Pic 2).
Step 1: Insert the battery to the battery housing (rst picture).
Turn on the power switch of the drone - the LEDs on the Drone
will start to ash. Place the drone down on a at surface, making
sure the drone is facing away from you.
Battery Warning:
Lithium Polymer batteries can expand, burst or catch re if used incorrectly, causing both properly damage and/or personal
injury. It is essen-tial to follow all the included instructions and safety warnings in full. The manufacturer, distributors and re-
tailers will assume no liability for the failure, which might comply with these safety instructions and warnings.
Instruction when Charging:
1. The battery must be removed from the product before charging.
2. If the battery has just been used, please let it cool down to room temperature before charging.
3. Charging must only be undertaken by an adult and only using the charger included with this product.
4. Always charge the battery on a non-ammable, heat-resistent surface with non-ammable surroundings.
5. Connect the battery to the USB charging cable.
6. Connect the USB charging cable to your USB charging devices the red LED on the battery will light up while charging and
will turn o once the battery is fully charged. It takes around 60-70 minutes to fully charge the battery. Never continue
to charge the battery after the red LED has turned o. Charging the battery completly you will need at least 10 minutes.
7. Lithium Polymer batteries do not last forever. If your battery becomes damaged in a crash or no longer charges properly,
immediately replace it with a new battery. To prolong the life of your battery it is always the best to retain a bit of charge
in your battery prior to char-ging it.
1. Make sure that the surrounding area is free of people, pets or other obstacles before you start to y.
2. The drone is designed for outdoor or inddor ying depending on how much space is available.
3. Always leave 1,5 meters between you and the drone
Sale Flight Environment:
5. Setup
Setting up the signal connection.