Instructions/manual MDX Mustang P-51D

Manual MODSTER MUSTANG P51-D

10 www.modster.at

Propeller Replacement

Flight Checklist

Base

Upper

Part

Spinner

Screw

Propeller

Motor

Shaft

Follow below steps to replace broken propeller and shaft adaptor. You will need help of a Philips screw

driver and pliers(not included).

1. Take off the spinner and propeller by loosen the screw with a Philips screw driver.

2. Take off the shaft adaptor carefully. If it is too tight, use pliers to help.

3. Replace any part broken.

4. Install all parts back by inverted orders to nish the replacement.

NOTE: This checklist is NOT intended to replace the content included in this instruction manual. Althought

it can be used as a quick start guide, we strongly suggest that read all though the manual completely

before proceeding.

- Ensure the throttle control stick is at bottom position before connecting the battery.

- Fly the model(hand-launch or take off from a at/level surface).

- Land the model on a at/level surface.

- Unplug the battery.

- Always turn off the transmitter last.