Instructions

Manual MODSTER CITO V2

22 www.modster.at

7. How-to-Start Guide:

Necessary tools:

• Hobby Knife (23410)

• Precision ruler

• Needle nose pliers (77980)

• Lexan scissors (214531)

• Flat and Philips screwdriver (53503)

• Wire cutters (40149)

• Cross wrench (129131)

• CA glue & rubber cement (217918)

• Thread locking compound (217918)

• Hex wrench (51437)

• 4 pcs AA Mignon batteries for the transmitter (103957)

Tire assembly

When installing the wheels, rst tighten the wheel nuts tightly and check the smooth running of the wheels.

Then loosen the wheel nuts until the wheels turn smoothly.

Stepwise wheel mounting:

• Insert the safety pin through the bore of the shaft

• Place the 6-pin wheel carrier on the pin

• Put on the wheel

• Put on the safety disc

• Tighten nut

Important notice: Be sure to unhitch the model during the initial start-up so that the wheels can rotate freely and the adjustments on the

transmitter can be carried out without any problem.