Manual

F
Manual - Vector SR48 Brushed
40 www.modster.at
Receiver conntection and binding
How to operate Your Vehicle:
Binding is the process of programming the receiver to recognize the GUID (Globally Unique
Identifier) code of a single specific transmitter. When a receiver is bound to a transmitter, the
receiver will only respond to that one.
If you need to rebind for any reason, please follow these steps:
1. Switch the transmitter off
2. Power on the receiver, then turn on the transmitter within 5 seconds.
3. The receiver LED will flash 3-8 seconds to bind automatically.
4. The binding is done when the LED stops flashing.
Push the trigger slightly away from you to go backward
(if with reverse function)
Pull the trigger towards you to go forward.