Instructions/manual SR80 Vector Pro

F
Manual - Brushless Transmitter
www.modster.at 39
Troubleshooting
Problem Mögliche Ursache Lösung
The system is not
connected.
Your transmitter and receiver are
too close.
Take transmitter 1 to 3 meters
away from the receiver.
You are aroung metal objects. Try an area with less metal.
The model is not the one that is
bound to the transmitter.
Check the selected model. If its
not yours, rebind transmitter
and receiver.
The receiver goes into
failsafe mode not
matching the distance
from the transmitter.
The receiver antenna is damaged,
cut or not above the vehicle/not
in an antenna tube.
Ensure your receiver antenna
is not damaged and above the
vehicle in an antenna tube.
Replace the receiver and
rebind to transmitter.
The receiver is not
responding during
operating.
Low battery voltage. Charge or replace battery.
Loose or damaged wires or
connector between battery and
receiver
Check wires and conntections
between battery & receiver and
ensure nothing is damaged.