User Manual

7/13
1
2
STEP-BY-STEP ASSEMBLY:
STEP 1: Insert H6 into panel D. Make sure the bolts go through the pre-drilled holes prop-
erly. Do not over tighten bolts.
STEP 2: Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking
out. Make sure the bolts go through the pre-drilled holes properly. Do not over tighten bolts.
nished edge
Anti-tip Restraint is REQUIRED in order to complete construction of this product.
When properly installed, this hardware can provide protection against the unexpected
tipping of furniture.