User Manual

10/13

STEP 8: Insert shelf supports into desired holes. Di󰀨erent holes accommodate di󰀨erent

shelf heights. Angle shelves to t between the rails and set on top of shelf supports.

hole for anti-tip

strap

STEP-BY-STEP ASSEMBLY:

STEP 7: Begin by installing all of the screws along one edge of the back panel. Next, using

a square or tape measure, make sure that the case is square. (if using a tape measure, the

distance from one corner, diagonally to the other corner should be the same in both direc-

tions.) Install the remaining screws, starting with the corners.