User Manual

Off
After 5 Sec
After 10 Sec
After 20 Sec
- To make your selection highlight your preference with the joystick and press OK.
- The phone will display a message confirming your choice or letting you know that
Auto Answer has been turned off.
Ø Auto Hyphen
This feature will automatically insert hyphens where appropriate, when you are storing or
dialing a number.
- Press MENU-6-6.
- Select the Auto Hyphen feature by scrolling with the joystick until that feature is
highlighted and pressing OK or by pressing the number 3.
- The phone will ask, Auto Hyphen On or Off. If you choose to turn this feature Off
your stored and dialed numbers will appear as one uninterrupted series. If this
feature is set to On hyphens will be inserted where appropriate (for example: 123-
123-1234 in the USA).
- The phone will display a message confirming that you have set this feature on or
off.
Ø Answer Call
- Press MENU-6-6.
- Select the Answer Call feature by scrolling with the joystick until that feature is
highlighted and pressing OK or by pressing the number 4.
- Select an option : Any Key, SEND key only.
- Press OK.
? Data Settings
Ø Data Rate
This feature sets the speed of connection between your phone and a Personal Computer
if they were connected and exchanging information. The speed talked about here
depends on carrier’s network and other variables.
- Press MENU-6-7.
- Select the Data Service feature by pressing the joystick OK.
- Select the Data Rate feature by scrolling with the joystick until that feature is
highlighted and pressing OK or by pressing the number 1.
- You will be asked to choose between a rate of 19200, 115200, and 230400.
Make your selection by highlighting your choice with your joystick and pressing
OK.
- Once you selection has been made your phone will display a confirmation message
stating “ Data Rate is set to ___ --bps”.
Ø Incoming Mode:
This feature determines what incoming information will be addressed by the phone and
what information will be ignored, for example if you activate Fax Only Mode, you will not
be able to answer voice calls with your phone
- Press MENU-6-7.
- Select the Incoming Mode feature by scrolling with the joystick until that feature is
highlighted and pressing OK or by pressing the number 2.
- You will be asked to choose from Voice Only, Modem Only or Fax Only mode.