User Manual

 





2. Basic Function
2.1 Processing in IDLE state
2.1.1 ‘Menu’ and ‘Ack’ processing in IDLE state
2.1.2 ‘Retrieve’ and ‘Save’ key processing upon number editing in IDLE state
2.2 Receiving a call
- If a call is received, it indicates a call by bell/ vibration/ bell after vibration/ non-sound
set by users.
- If a call is received, press any key to connect the call regardless of lock.
- If a call is ended, press ‘End’ key.
( Talk time flashes and returns to the initial screen. )
* Upon ‘auto receipt function’ setting, after the set time expires, it directly goes into
busy state.
* If the service provider offers Caller ID service and Multi number service, phone
number is displayed in the screen.
2.3 Making a call
2.3.1 General case
- Press area code and phone number, and then press ‘Send’ key.
( When you press wrong phone number, press ‘CLR’ key to correct that. If you press
‘CLR’ key shortly, it is deleted one by one and if you press that long, all are deleted. )
- If the other party is connected, a talk begins.
- Upon end of call, press ‘End’ key.
* When also making a call to the same area, you must press area code.
* Set frequently used area code in your mobile phone to make a call without pressing
an area code. ( see ‘4. auto area code’ function of Menu ‘5. screen environment
setting’ )
* If auto area code was not set, you can talk with the other party without pressing
provider ID when making a call with a mobile phone that subscribed to the same
provider.
2.3.2 Making a call with redial