Instructions / Assembly

Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 13
STEP 11
Attach the bracket B into the iron rack B
and fixture as shown.
STEP 6
Adjust arms to proper position.
STEP 7
Install stem connecting the upper and
lower ends of the lamp body.
Install stems (A~D) based on the
desired length of the item on the fixture,
adding conopy one finished.
STEP 10
Attach the iron rack A onto the iron rack B
and bracket B using ball nuts B as shown.
STEP 8
Place the cover onto the iron rack A,
then secure with decorative nut.
STEP 9
Screw the stem E into the fixture.
STEP 5
Install bulb (not included)
Attach the fixture onto bracket B as shown.
STEP 4
Secure the canopy to the
mounting unit with the
ball nuts A.
STEP 12
White wire from
the fixture
Ground wire from
the Fixture
Black wire from
the fixture
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)