Specification

ASSEMBLY INSTRUCTIONS
ITEM NO.: LPP-20725-3
B → A → C → D
1. Carefully unpack and identify all parts referring to illustration for parts identification.
2. Turn the power to the installation point OFF.
3. Unravel the supply power and ground wires and pass them through the center holes of long
stem (B), metal ring (C) and fixture loop (D).
4. Unfold the fixture arms in place.
5. Thread the long stem (B) onto the nipple of the socket assembly (A).
6. Carefully place the metal ring (C) through protruding nipple of the long stem (B), securing
with fixture loop (D). Hand tighten until snug.
7. Unfold the metal ring (C) in place.
8. Referring to the installation instruction with the product for the wiring and installation.
9. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on
the fixture for maximum wattage.
10.Restore the power to the installation point ON.
11.Assembly is completely. Retain this sheet for future reference.
Use 60Wx3 Max type B10/T8 BULB
(Bulb not included)