Brochure

C
US
10
75-136.49
Request Catalog 9-122 For Complete Technical Information and Specifications.
GAS-FIRED, HIGH-INTENSITY INFRARED UNITS
Modine’s high-intensity ceramic infrared heater is approved for indoor unvented
installation. It does not utilize a fan, thus eliminating noise and draft distractions.
Gas and power connections are simple and maintenance is inexpensive, since there
are no moving parts to maintain. Available controls include Direct Spark Ignition,
Self-Generating Millivolt, and Intermittent Pilot (non-100% shut-off).
Modine’s IHR series heaters include the following features:
• Rugged aluminized steel frame.
• Exclusive ceramic burner provides maximum infrared radiation.
• Stainless steel rods increase heat temperature and efficiency.
• Highly polished aluminum reflector design.
• Direct spark or pilot ignition.
• Potted circuitry for protection in high moisture environments (DSI only).
• 5-year limited ceramic burner warranty.
• CSA Design Certified, UL-Listed, CE Certified.
• 30,000 to 200,000 Btu/Hr Input • Simple Chain Mounting • High Heat Transfer Ceramic Tiles • Unvented
Operation • Low Installation Cost • Ideal for Spot Heating • Available in Natural or Propane Gas
MODEL IHR
DO NOT LOCATE ANY GAS-FIRED UNIT IN AREAS WITH CHLORINATED,
HALOGENATED, OR ACIDIC VAPORS IN ATMOSPHERE.
Model
Size
Gas Controls ③④
Input Rating
(Btu/hr)
Recommended Mounting Height (Ft.)
Radiating
Surface
(sq. in.)
Standard Reector Parabolic Reector
30°
30°
IRH 30
Single Stage or Millivolt 30,000
12 - 14
12 - 15 85
IRH 60
Single Stage or Millivolt 60,000
14 - 16
18 - 21 170
IHR 90
Single Stage or Millivolt 90,000
16 - 18
21 - 25 255
IHR 130
Single Stage or Millivolt 130,000
21 - 24
26 - 32 340
IHR 160
Single Stage or Millivolt 160,000
24 - 28
29 - 35 425
Table 10.1 - IHR High-Intensity Infrared Heater Performance Data