Product Overview

4
9-123.2
FEATURES AND BENEFITS - MODEL IHR
Features
1. High temperature cordierite-based grooved ceramic
tiles with perforations along both the top and bottom of
the grooves
2. Polished aluminum reflectors
3. 16 gauge aluminized steel frame
4. No air mover is utilized
5. Input ranges from 30,000 Btu/hr through 160,000 Btu/hr
in Natural or Propane gas
6. Direct spark or self-energizing standing pilot ignition
7. 115V, 25V, or millivolt controls
8. Externally-mounted controls
9. Burners are replaced by removing one fastener
10. CSA design certification for indoor, unvented operation
in commercial and industrial installations
Figure 4.1 - Construction Features - Model IHR
Benefits
1. Increased temperature and surface area to provide
maximum heat transfer while maintaining lower gas input
ratings.
2. Efficiently direct radiant heat to the desired area, for
increased comfort over wider areas.
3. Provides support for simple chain mounting.
4. Eliminates fan noise, drafts, maintenance and reduces
electrical energy costs.
5. Wide input range to accommodate a variety of heating
requirements
6. Maximize application flexibility.
7. Accommodate a wide range of electrical inputs.
8. Allow convenient access to gas valve, control system,
transformer, and gas orifices, increasing ease of installation
and service.
9. Eliminates the removal of the unit from its mounted
position for service.
10. Assures that the unit conforms to national safety
standards.