Instructions / Assembly

1-500.3 11
Figure 11.1 – Dimensions (inches)
Note: Mounting point spacing on brackets based on joist spacing 16” on-center.
Table 8.1 – Unit Mechanical/Electrical Data
Unit Size 30 45
Coil
High Capacity – 2 Row Face Area, ft
2
1.625 1.625
Standard Coil Connections ½” NPT ½" NPT
Approximate Coil Volume (Gallons) 0.40 0.40
Blowers (Direct Drive)
(Qty) - Diameter x Width (Inches) (2) – 5.75 x 7 (2) – 5.75 x 7
High Speed (RPM) 1050 1625
Motor Blower Connection Direct Drive Direct Drive
Low Speed (RPM) 725 1090
High CFM 405 710
Low CFM 280 425
Moto
r
Motor Type Permanent Spilt Cap Permanent Split Cap
Shaft Arrangment Double Shaft Double Shaft
(Qty) - HP (1) – 1/20 (1) – 0.40
Voltage 115V/1ph/60Hz 115V/1ph/60Hz
Shipping Weight
–
lbs. (approximate)
70 73