Installation Manual

DIMENSION / ELECTRICAL & MECHANICAL DATA
1-500.3 11
Figure 11.1 – Dimensions (inches)
Note: Mounting point spacing on brackets based on joist spacing 16” on-center.
Table 8.1 – Unit Mechanical/Electrical Data
Unit Size
30
45
Coil
High Capacity – 2 Row Face Area, ft
2
1.625 1.625
Standard Coil Connections ½” NPT ½" NPT
Approximate Coil Volume (Gallons) 0.40 0.40
Blowers (Direct Drive)
(Qty) - Diameter x Width (Inches) (2) – 5.75 x 7 (2) – 5.75 x 7
High Speed (RPM) 1050 1625
Motor Blower Connection Direct Drive Direct Drive
Low Speed (RPM) 725 1090
High CFM 405 710
Low CFM 280 425
Motor
Motor Type Permanent Spilt Cap Permanent Split Cap
Shaft Arrangment Double Shaft Double Shaft
(Qty) - HP (1) – 1/20 (1) – 0.40
Voltage 115V/1ph/60Hz 115V/1ph/60Hz
Shipping Weight
–
lbs. (approximate)
70 73