Manualshelf

Technical Specs

ManualsBrandsModeshift ManualsElectronicsModeshift Validator
12345678910
FCC ID: 2AV8HMTV101
5
• Be careful not to damage your fingernails when you remove the back cover.
• Do not bend or twist the back cover excessively. Doing so may damage the cover.
• Push the SIM and SAM card into the socket correctly. Be sure the SIM and SAMcard is in right
position.
• Do not insert a memory card into the SIM card slot. If a memory card happens to be lodged
in the SIM card slot, take the device to a Telpo Service Centre to remove the memory card.
• Use caution not to lose or let others use the SIM card. Telpo is not responsible for any
damages or inconveniences caused by lost or stolen cards.
Transfer data
The peripheral can use USB cable to transfer data from device through the USB and Micro USB.
6 PIN Air port also can be used to transfer data.
• Plug one end of the USB cable into the type C and Micro USB and the other end into peripheral.