Use and Care Manual

Before first use
1. Remove all packaging materials and stickers or labels.
2. Clean the basket and pan with hot water, with some washing liquid and a
non-abrasive sponge. These parts are safe to be cleaned in dishwasher.
3. Wipe insede and outside of the appliance with a clear cloth. And there is no
need to fill the pan with oil and frying fat as the appliance works on hot air.
Using the appliance
1. Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
2． Put the basket in the pan.（fig3）
Do not fill the pan with oil or any other liquid.
3. Preheat the appliance for 3 minutes when it is cold. Press the WARM-UP “+” first, and then
press the power on button to start the appliance to warm up gradually. After the warming-up,
carefully pull the pan out of the air fryer.
Caution
：
The appliance will stop heating after the pan is pulled out
，
the air blower will stop in 5
seconds.
4. Place the ingredients in the basket, and then pull the basket into the appliance.
（fig.5）
5. Select proper function and temperature for the ingredients. See section
'settings' in this chapter to determine the right temperature.（fig7）
Notes： There are two buttons(TIME '+' & '-') in the control panel which can adjust
time setting - Increase/Decrease 1 minute per a press or increase/decrease rapidly
in the unit of 1 minute by long pressing. There are two buttons(TEMP '+' &'—') in
the control panel which can adjust temperature setting - Increase/Decrease 5 degrees
per a press or increase/decrease rapidly in the unit of 5 degrees by long pressing.
6. Select proper function and temperature for the ingredients.then press power on
button, the appliance will run and heating the ingredient.
8. The heating-up icon and blower icon will be blinking during the running of the
applicant.(Fig. 6)
Caution：During the hot air frying process, the heating-up icon blinks and goes out
from time to time. This indicates that the heating element is switched on
(temperature reaches the setting） and off(temperature drops below the setting) to
maintain the set temperature.
9. To switch on the appliance, turn the timer button to the required preparation
time.The timer begins to run.
10. Oil from the ingredients will gather in the bottom of the pan.