Data Sheet
Table Of Contents
- General Description
- Pin Assignment
- Environmental Specifications
- Electrical Characteristics
- Detailed Description
- Application Information
- Mechanical Information
- Soldering Information
- Ordering & Contact Information
- RoHS Compliant & ams Green Statement
- Copyrights & Disclaimer
- Document Status
- Revision Information
- Content Guide
ams Datasheet Page 13
[v1-01] 2015-Oct-12 Document Feedback
AS-MLV-P2 − Application Information
Run-In
Each time after powering the sensor, the baseline of the
sensitive layer performs a small run in phase. The curve is
characterized with a steady increasing resistance. The length of
this phase is depending on the sensors history. The longer the
sensor was unpowered the longer the run in phase will take.
The standard duration is approx. 3-5 minutes.
Figure 14:
Run-In Phase of Sensor
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
100000
150000
200000
250000
300000
350000
400000
450000
500000
550000
600000
Resistance [
Ω
]
Time [sec]