Installation Guide

2
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms retains the right to modify the design of our products at any time as part of the company’s continuous improvement program.
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the mounting screw (C1) from the xture.
4. Secure the mounting back plate to the junction box using junction box screws (B1). The side of the mounting back plate marked “GND” must
face out.
CONNECTING THE WIRES (Fig. 2)
5. Connect the xture’s wires to junction box wires as shown in Fig. 2,
making sure that all wire connectors (A1) are secured. If your outlet box
has a green or bare copper ground wire, connect the xture’s ground wire
to it. Otherwise, connect the xture’s ground wire directly to the back plate
using the green screw provided. After wires are connected, tuck them
carefully inside the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
6. Slide the glass into the front bracket. Place the cover plate (E1) and
glass holder (D1) over the glass and secure with screws (F1).
7. Place the canopy plate over the mounting back plate; secure it with
the mounting screw (C1).
INSTALLATION INSTRUCTION
Vogue
WS-3111, WS-3111F, WS-3115, WS-3115F
FIG.1
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
WS-3111/WS-3111F Back Plate Dimensions
WS-3115/WS-3115F Back Plate Dimensions
Junction Box
A1
Wire Connector
B1
Junction Box Screw
Ground Wire
Mounting Backplate
Front Bracket
Canopy Plate
Mounting Screw
C1
F1
Fixture Screw
D1
Glass Holder
E1
Cover Plate
Glass
WS-3111/WS-3111F: (RPL-GLA-3111)
WS-3115/WS-3115F: (RPL-GLA-3115)
4 1/8”
1 3/4”
1 3/8”
4 1/2”
6 3/8”
1 3/8”
1 3/4”
4 1/8”