Installation Sheet
3
INSTALLATION INSTRUCTION
WS-28119/WS-28129
3. Remove the mounting screw (B) from the xture, and then take down the mounting back plate.
4. Choose between one directional unilateral or two directional bilateral illumination based on your application using the individual on/o
switch located in the canopy (Fig. 5)
5. The lamp can switch between three color temperatures (2700K-3000K-3500K), which can be adjusted to your preference with the two
switches in the canopy (Fig. 4).
6. Secure the mounting ring (C) to the junction box using junction box screws .
(i) Using any other non-original-manufacturer provided junction box screw may result in safety issue;
(ii) The side of the mounting ring marked “GND” must face out
7. Secure the mounting back plate and conversion plate (D) to the mounting ring (C) with the junction box screws .
8. Connect the driver input wires to junction box wires as shown in Fig. 3, making sure that all wire connectors (A) are secured. If your outlet
box has a green and bare copper ground wire, connect the fxture’s ground wire to it. Otherwise, connect the fxture’ s ground wire
directly to mounting ring using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
9. Secure the xture to the mounting back plate using the mounting screw (B).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Nov. 2020Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
Modern Forms.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
3000K3500K
2700K
ON
OFF
Junction Box Screw
Junction box
Mouting Ring
Conversion Plate
Mounting back plate
Junction Box Screw
Mounting Screw
B
C
D