Installation Sheet
2
INSTALLATION INSTRUCTION
WS-28119/WS-28129
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
3. Loosen the mounting screw (B) from the xture, and remove the mounting back plate.
4. Choose between one directional unilateral or two directional bilateral illumination based on your application using the individual
on/o switch located in the canopy (Fig. 5)
5. The lamp can switch between three color temperatures (2700K-3000K-3500K), which can be adjusted to your preference with the
two switches in the canopy (Fig. 4).
6. Secure the mounting back plate to the switch box using junction box screws .
(i) Using any other non-original-manufacturer provided junction box screw may result in safety issue;
(ii) The side of the mounting plate marked “GND” must face out
7. Secure the xture to the mounting back plate using the mounting screw (B).
8. Connect the driver input wires to switch box wires as shown in Fig. 3, making sure that all wire connectors (A) are secured. If your
outlet box has a green or bare copper ground wire, connect the fxture’s ground wire to it. Otherwise, connect the fxture’s ground wire
directly to the mounting back plate using the green screw provided. After wires are connected, tuck them carefully inside the switch
box. Secure the fxture to the mounting back plate using the mounting screw (B).
GND
1 3/8" 1 3/4"
Ø4"
Back Plate Dimensions
Mounting Ring Dimensions
Conversion Plate Dimensions
8 1/4"
4 1/2"
1 3/8"
1 3/5"
7 11/16"
2 11/16"
1 3/5" 1 3/8"
Nov. 2020Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
Modern Forms.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Switch Box
Wire Connector
Ground Wire
Junction Box Screw
Fixture
Mounting Screw
Mounting back plate
Driver
A
B