Installation Sheet

Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2014
INSTALLATION INSTRUCTION
Palladian - Crystal Part
WS-11310-GLA
PREPARATION
1. Shut o the power at the circuit breaker.
2. Carefully unpack your new xture and lay out the parts
on a clear area. Be careful not to lose any small parts necessary
for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the shade (M1) from the xture WS-11310.
Remove the glass (K1) by unscrewing the knurling nuts (I1)
and rubber sleeves.
4. Remove the screws (P1) from the xture. Secure the top
crystal (D1) and bottom crystal (G1) onto the xture
back plate (L1) using the studs (N1).
5. Place the glass diuser (O1) onto the xture bottom holder.
Secure it using the nuts (I1) and rubber sleeves.
6. Return the shade (M1) into the clips on the xture
back plate (L1).
FIG.1
N1
G1
O1
K1
I1
P1
L1
D1
M1