Installation & Assembly

2Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
31618 - Wall Sconce
WS-31618
FIG.1
Back Plate Dimensions
E1
C1
A1
B1
E1
D1
Allen Wrench
Allen Screw
Junction
Box
4 1/2”
4 1/2”
Ø3 1/2”
Ø2 3/4”
Wire
Connector
Driver
Junction Box Screw
Allen Wrench
Allen Screw (plastic)
Crystal
Mounting Plate
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
* Requires driver to be recessed within the junction box.
3. Remove the allen screw (C1) from the xture.
4. Connect the Driver’s input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1) are secured.
If your outlet box has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground
wire directly to the back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (Fig. 1)
5. Secure the mounting back plate to the junction box using junction box screws (B1).
The side of the mounting back plate marked “GND” must face out.
6. Secure the xture onto mounting plate with allen screw (C1)
using allen wrench (E1).
7. Insert the crystal into the xture, secure it with plastic allen screw (D1)
using allen wrench (E1).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring