Installation & Assembly

18 FR-W1920-60L
12. Installing the Adapter Plate
Remember to disconnect the power at the circuit breaker.
1. Remove 1 of 3 pre-installed screws from the mounting ring
and loosen the other screws (do not remove).
2. Place key holes in the adapter plate over the 2 screws
previously loosened from the mounting ring. Turn the adapter plate
until the adapter plate locks in at the narrow section of
the key holes (FIG.15).
3. Tighten the 2 mounting screws previously loosened and the
1 previously removed to secure adapter plate.
FIG.15
Light Kit plate +
Lower decorative ring