Installation & Assembly

16 FR-W1910-52/62L
10. Installing the Wall Control (cont.)
FIG.14
Remember to disconnect the power at the circuit breaker.
1. Carefully tuck the wire connections inside the outlet box.
Secure the wall control with the 2 wall control screws
provided (FIG.14).
2. Attach the wall mounting plate over the wall control and
secure with the 2 wall mounting plate screws provided.
3. Fasten the wall plate to the wall mounting plate.
NOTE: Fan(s) are required to be installed within 30 feet of the
wall control to ensure reliable communication.
NOTE: A maximum of 2 fans can operate on a circuit through
the wall control.
NOTE: A maximum of 12 fans can operation through an on/o
switch or breaker when utilizing the Modern Forms app for
the fan control (without the wall control in the circuit).
Wall Mounting Plate
Wall Outlet Box
Wall Control
Wall PlateMounting Screws